Vauxhall Mokka 2014 Owner'S Manual Download Page 109

Page: 109 / 217

108

Lighting

Hazard warning flashers

Operated with the

button.

Turn and lane-change

signals

lever up

= right turn signal

lever down = left turn signal
If the lever is moved past the

resistance point, the turn signal is

switched on constantly. When the

steering wheel moves back, the turn

signal is automatically deactivated.
For three flashes, e.g. when changing

lanes, press the lever until resistance

is felt and then release.
Move the lever to the resistance point

and hold for longer indication.

Switch the turn signal off manually by

moving the lever to its original

position.

Front fog lights

Operated with the

button.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands