Vauxhall Mokka 2014 Owner'S Manual Download

Page: 92 / 217

Instruments and controls

Vehicle Information Menu

Press the MENU button to select the

Vehicle Information Menu, or on

Uplevel-Combi-Display select

Turn the adjuster wheel to select a

submenu. Press the SET/CLR button

to confirm.
Follow the instructions given in the

submenus.
Possible submenus can be,

depending on the version:

■ Unit: displayed units can be

changed

■ Tyre Pressure: checks tyre

pressure of all wheels during

driving

175

■ Remaining Oil Life: indicates when

to change the engine oil and filter

■ Traffic Sign Assistant: displays

detected traffic signs for the current

route section

141

■ Speed Warning: if exceeding the

preset speed, a warning chime will

be activated

Selection and indication can be

different between Midlevel- and

Uplevel-Combi-Display.

Trip/Fuel Information Menu

Press the MENU button to select the

Trip/Fuel Information Menu, or select

on Uplevel-Combi-Display.

Turn the adjuster wheel to select a

submenu. Press the SET/CLR button

to confirm.

■ Trip odometer 1
■ Trip odometer 2
■ Digital speed

Trip odometer 2 and digital speed are

only available on vehicles with

Uplevel-Combi-Display.
On vehicles with trip computer more

submenus are available.
Selection and indication can be

different between Midlevel- and

Uplevel-Combi-Display.
Trip/Fuel Information Menu, Trip

Computer

96.

ECO Information Menu

Press the MENU button to select

in the top line of the Uplevel-

Combi-Display.
Turn the adjuster wheel to select a

submenu. Press the SET/CLR button

to confirm.
Submenus are:

■ Shift indication: Current gear is

indicated inside an arrow. The

graphic above recommends

upshifting for fuel saving reasons.
Eco index display: The current fuel

consumption is indicated on a

segment display. For economical

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands