Vauxhall Mokka 2014 Owner'S Manual Download Page 69

Page: 69 / 217

Storage

seat belt buckle straps are not twisted

or caught under the seat cushion,

then push the front part of the seat

cushion firmly down until it latches.

Caution

When returning rear seat backrest

to the upright position, place the

rear seat belt and buckles

between the rear seat backrest

and one cushion. Make sure the

rear seat belt and buckles do not

get pinched under the rear seat

cushion.
Make sure the seat belts are not

twisted or caught in the seat

backrest and are arranged in their

proper position.

Load compartment cover

Do not place any objects on the cover.

Removing

Unhook retaining straps from tailgate.
Lift cover at the rear and push it

upwards at the front.
Remove the cover.

Fitting

Engage cover in side guides and fold

downwards.
Attach retaining straps to tailgate.

Rear floor storage cover

Rear floor cover

Grasp the handle and lift the cover.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands