Vauxhall Mokka 2014 Owner'S Manual Download Page 23

Page: 23 / 217

Keys, doors and windows

The setting can be changed in the

menu Settings in the Info-Display.

Vehicle personalisation

99.

The setting can be saved for the key

being used. Memorised settings

21.

Locking

Close doors, load compartment and

fuel filler flap.

Press button

If the driver's door is not closed

properly, the central locking system

will not work.

Central locking buttons

Locks or unlocks all doors, the load

compartment and fuel filler flap from

inside the passenger compartment.

The central locking buttons are

located in the driver's door and

passenger's door.
Press the

button to lock.

Press the

button to unlock.

Fault in radio remote control

system

Unlocking

Manually unlock the driver's door by

turning the key in the lock. Switch on

the ignition and press the central

locking button

to unlock the other

doors, load compartment and fuel

filler flap. By switching on the ignition,

the anti-theft locking system is

deactivated.

Locking

Manually lock the driver's door by

turning the key in the lock.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands