Vauxhall Mokka 2014 Owner'S Manual Download Page 54

Page: 54 / 217

Seats, restraints

The covers of the guides will swivel

backwards automatically when

attaching the child restraint system.

Top-tether fastening eyes

Depending on country specific

equipment, the vehicle might have

two or three fastening eyes.
Top-Tether fastening eyes are

marked with the symbol

for a child

restraint.

For non-ISOFIX child restraints,

fasten the Top-Tether strap to the

Top-Tether fastening eyes. The strap

must run between the two guide rods

of the head restraint.
For ISOFIX child restraints, fasten the

Top-Tether strap to the Top-Tether

fastening eyes in addition to the

ISOFIX mounting. The strap must run

between the two guide rods of the

head restraint.
ISOFIX child restraint systems of

universal category positions are

marked in the table by IUF.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands