Vauxhall Mokka 2014 Owner'S Manual Download Page 103

Page: 103 / 217

102

Instruments and controls

Personalisation by Driver:

Activates or deactivates the

personalisation function.
Auto Reverse Gear Wiper:

Activates or deactivates

automatically switching on of the

rear window wiper when reverse

gear is engaged.

■ Collision Detection Systems

Park Assist: Activates or

deactivates the ultrasonic sensors.

■ Lighting

Vehicle Locator Lights: Activates or

deactivates the entry lighting.
Exit Lighting: Activates or

deactivates and changes the

duration of exit lighting.

■ Power Door Locks

Open Door Anti Lock Out: Activates

or deactivates the automatic door

locking function while a door is

open.
Auto Door Lock: Activates or

deactivates the automatic door

unlocking function after switching

off ignition. Activates or deactivates

the automatic door locking function

after driving-off.
Delay Door Lock: Activates or

deactivates the delayed door

locking function.

■ Remote Lock/Unlock/Start

Remote Lock Feedback: Activates

or deactivates the hazard warning

light feedback whilst locking.
Remote Unlock Feedback:

Activates or deactivates the hazard

warning flasher feedback whilst

unlocking.
Remote Door Unlock: Changes the

configuration to unlock only the

driver's door or the entire vehicle

whilst unlocking.
Relock Remotely Unlocked Doors:

Activates or deactivates the

automatic relock function after

unlocking without opening the

vehicle.

■ Return to Factory Settings?:

Resets all settings to the default

settings.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands