Vauxhall Mokka 2014 Owner'S Manual Download Page 90

Page: 90 / 217

Instruments and controls

Seek the assistance of a workshop.
Adaptive forward lighting

106.

Flashes

System switched to symmetrical low

beam.
Control indicator

flashes for approx.

4 seconds after the ignition is

switched on as a reminder that the

system has been activated

104.

Automatic light control

103.

Fog light

illuminates green.

The front fog lights are on

108.

Rear fog light

illuminates yellow.

The rear fog light is on

109.

Cruise control

illuminates white or green.

Illuminates white

The system is on.

Illuminates green

Cruise control is active.
Cruise control

133.

Vehicle detected ahead

illuminates green.

A vehicle ahead is detected in the

same lane.
Forward collision alert

136.

Bonnet open

illuminates when the bonnet is

open on vehicles with stop-start

system.
Stop-start system

120.

Door open

illuminates red.

A door or the tailgate is open.

Information displays

Driver Information Centre

The Driver Information Centre (DIC)

is located in the instrument cluster

between speedometer and

tachometer. It is available as

Midlevel-Display or Uplevel-Combi-

Display.

Midlevel-Display indicates:

■ overall odometer
■ trip odometer
■ some control indicators
■ vehicle information

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands