Vauxhall Mokka 2014 Owner'S Manual Download

Page: 38 / 217

Seats, restraints

Lumbar support

Adjust lumbar support using the

four-way switch to suit personal

requirements.
Moving support up and down: push

switch up or down.
Increasing and decreasing support:

push switch forwards or backwards.

Adjustable thigh support

Pull the lever and slide the thigh

support.

Heating

Adjust heating to the desired setting

by pressing the

button for the

respective seat one or more times.

The control indicator in the button

indicates the setting.
Prolonged use of the highest setting

for people with sensitive skin is not

recommended.
Seat heating is operational when

engine is running and during an

Autostop.
Stop-start system

120.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands