Vauxhall Mokka 2014 Owner'S Manual Download

Page: 165 / 217

164

Vehicle care

3. When fitting a new bulb, engage

the lugs in the recesses on the

reflector.

4. Reinstall the headlight assembly.
5. Place headlight protective cover

in position and close.

Sidelights

1. Remove the socket from the

assembly by turning

counterclockwise.

2. Remove bulb socket from

reflector.

3. Detach plug connector from bulb.

4. Remove bulb from socket.
5. Insert new bulb.
6. Plug connector onto bulb.
7. Insert socket in reflector.
8. Reinstall the assembly.

Xenon headlights

Danger

Xenon headlights work under

extremely high electrical voltage.

Do not touch. Have bulbs replaced

by a workshop.

Cornering lights

1. Remove the protective cover.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands