Vauxhall Mokka 2014 Owner'S Manual Download Page 100

Page: 100 / 217

Instruments and controls

Route guidance

Additional to the navigation

information in the Colour-Info-

Display, route guidance is displayed

in the Driver Information Centre.

Vehicle personalisation

The vehicle can be personalised by

changing the settings in the

Infotainment system.
Depending on vehicle equipment

some of the functions described

below may not be available.

Settings in the

Graphic-Info-Display

CD 400
Press the CONFIG button for the

Settings menu.

Press the CONFIG button, when

ignition is on and Infotainment system

is activated.
Setting menus is displayed.
To switch the setting menus, turn the

MENU knob.
To select the setting menus, press the

MENU button.
To close or back to previous, press

the BACK button.
The following settings can be

selected:

■ Languages
■ Time Date
■ Radio settings
■ Bluetooth settings
■ Vehicle settings

In the corresponding submenus the

following settings can be changed:

Languages

Selection of the desired language.

Time Date

See Clock

76.

Summary of Contents for Mokka 2014


























































































































































































































Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands

Vauxhall Mokka 2014, Owner'S Manual

Search results

Summary of Contents for Mokka 2014

Reviews:

Related manuals for Mokka 2014

Brands by name

Popular brands