V&T TS-I Series, User Manual

Page: 4 / 79

High Reliability Design
„ Meeting the Relevant International Product Standards
IEC61800 − 2
General requirements–Rating specifications for low voltage adjustable
frequency a.c. power drive systems
IEC61800 − 3 EMC product standard including specific test methods
IEC61000 − 6 Electromagnetic compatibility
（
EMC
）
–Part6:Generic standards
IEC61800 − 5 − 1 Safety requirements –Electrical, thermal and energy
UL508C UL Standard for Safety for Power Conversion Equipment
„ Integrated Design
‹
Unified design of hardware interfaces: Unified design of control board, button/shuttle
type operation panel facilitates the operation and maintenance.
‹
Unified design of software protocol: The driver series have unified terminal/operation
panel RS485, and universal expansion port SPI protocols(Modbus protocol).
‹
Integrated design of main circuit terminals:TS − I − 4T030A and the following
integrated
，
TS − I − 4T039A
～
TS − I − 4T150A integrated
，
TS − I − 4T176A and the above
integrated
，
to facilitate the operation and maintenance.
。
‹
Built − in braking unit design: to reduce the cost and the installation space.
‹
Unified design of built − in expansion cards: Functional card/ PG feedback
card/communication adapter card, meeting the industry application requirement.
‹
Full series standard shared DC bus design: Realizing standard shared DC bus
schemeshared DC bus without modifying the driver or adding peripheral circuit. It is
applicable to such industry applications as paper making, chemical fiber, metallurgy
and EPS.
„ Adaptability Design
‹
Independent duct design: The full series supports the application demand of
mounting heatsink out of the cabinet,
‹
Compact structure design: With complete thermal simulation and unique cold plate
process, the driver has compact structure, meeting the demands of OEM customers.
‹
Complete system protection design: The advanced system designs, e.g., adopting
protective coating on PCB, galvanizing the copper buses, and adopting sealed key
in full series of product components, and the button and shuttle type operation
panels meeting with the IP54 requirement, greatly improve the protection capacity of
the system.
‹
Wide voltage range design: the DC operating voltage range is DC 360 − 720V, with
mains voltage fluctuation recording function.
‹
Precise current detection and protection: The full series of drivers adopt precise Hall
sensor to detect the output current, meeting the quick real time control and
protection requirement of software and hardware, ensuring the performance and