49
Installation
With 3 or 4-Sided Trims
surface of positioning
bracket
Install Appliance for 3 or 4-Sided Trims
Place appliance in framing
1. Install stud brackets on each side of appliance (2
screws per bracket). Use the hole or slot according
to the thickness of wall
fi
nish—see Planning, Fram-
ing—3-4 sided trims on page 25.
2. Taking great care not to cut your hands on sheet
metal edges, lift appliance up and insert into fram-
ing.
Ensure that unit is at the right height with consider-
ation to the height of hearth or combustible
fl
ooring.
When setting the position of the appliance within the
framing, the front surface of the positioning bracket
indicated should always be
fl
ush with where you
anticipate the
fi
nished wall surface to be. Adjust the
position of the side brackets to suit.
If in doubt, allow for slightly less material thick-
ness as the trims have additional 3/4” of adjust-
ment.
Complete Installation of Optional HeatShift
(if used)
See HeatShift installation instructions in this manual
Appendix D - HeatShift System on pages 83-102.
