47
Installation
With 1130CIK—Clean Install Kit
2. Install the lower panel using the three studs at the
base of the appliance (3 nuts).
3. On the appliance, install the side panels as indicated
(3 x 1/2” screws per side).
4. Install the upper
fi
nishing strip under the
appliance`s case top edge:
With no HeatShift.
Remove the 3 screws retaining a
removable convection ba
ffl
e and slide the
fi
nishing
strip over the ba
ffl
e`s tabs, then secure the strip
and ba
ffl
e together with 3 countersunk screws
supplied.
ONLY
with HeatShift.
Remove the 3 screws retain-
ing the removable convection ba
ffl
e, remove the
ba
ffl
e, then slide the
fi
nishing strip over the screw
holes and secure it with 3 countersunk screws
supplied. Discard the convection ba
ffl
e.
5. Install the top panel as indicated (3 x 1/2” screws).
NOTE
Use of the optional HeatShift System requires
the convection baffle to be removed above the
firebox. See Appliance Preparation, Optional
HeatShift on page 43 or Appendix D -
HeatShift System on pages 83-102.
