63
WARNING
The window unit must be correctly
installed, fastened and sealed after
servicing or serious bodily injury and/or
damage to the appliance may result.
To ensure a safe operation:
• Double-check that the top of the window
frame is correctly installed;
• Verify that the spring-loaded latches are
hooked properly to the four window tabs
then;
• Pull out the top of the window and release
it to insure the springs return it; repeat
with the bottom of the window;
• Ensure the window is sealed before
operation.
WARNING
Failure to install the window correctly can:
• Leak carbon monoxide.
• Affect the performance of the fireplace.
• Damage components.
• Cause overheating resulting in dangerous
conditions.
Damage caused by incorrect window
installation is not covered by the Valor
Warranty.
Hot Glass Warning Plate
Installation
Window Re-Installation
Reinstall and Check Window
To reinstall the window:
1. Place the top window frame tabs above the
fi
rebox
and push against the
fi
rebox, ensuring it’s centered
left to right.
2. The window is secured by four spring-loaded latches
which hook to tabs on each side of the frame.
While holding the top of the window to the
fi
rebox,
hook the top two latches to the frame’s top tabs.
Repeat with the bottom tabs and latches.
3. Pull and release the top of the window frame to
ensure the spring-loaded mechanism returns the
window to the
fi
rebox. Repeat with the bottom of
the window.
4. Apply
fi
rm hand pressure around window frame to
make sure window is sealed tight against
fi
rebox.
Tabs at top
5.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window, re-
install it by sliding it between the glass and the
frame as indicated.
