53
Installation
Liners
Install Liners
The following guidelines apply for all liners with the
following exceptions
1170RGL Re
fl
ective Glass Liners:
see installation
manual supplied with liners.
1115LSL Ledgestone Liners:
remove the burner cover
(4 screws) to allow installation. Reinstall after step 6.
1. Inside the
fi
rebox, on each side at the top, release
the screw of the side panel anchors so they can
rotate freely (one per side).
2. Insert the bottom of one of the side panel between
the burner cover and the side wall and rotate it
slightly to insert it totally inside the
fi
rebox. Push it
gently against the side wall. Rotate the side panel
anchor to hold it in place.
3. Place the rear panel against the back of the
fi
rebox
behind the rail retainers at the bottom and behind
the side panel already installed.
Note:
If you are installing the optional 1105RGL—Re-
fl
ective Glass liner panel (with 1125FBL—Fluted
Black Liners or 1160PBL—Plain Black Liners),
place the re
fl
ective panel, smooth side visible, in
front of the rear ceramic panel, held in place as well
by the bottom panel retainers.
4. Insert the bottom of the other side liner panel
between the burner cover and the side wall and
rotate it slightly to insert it totally inside the
fi
rebox.
Push it gently against the side wall. Rotate the side
panel anchor to hold the panel in place.
5. Insert the top panel, beveled edge towards the back
of the
fi
rebox, on top of the side panel, slide it
acress to rest on both side panels and rear panel.
6. Tighten the side panel anchors.
