background image

Owner’s Operation and Instruction Manual

CAUTION!

Please read this entire manual be-
fore you install and use your new 
heater. Failure to follow instructions 
may result in property damage, 

bodily injury, or even death.

SAFETY TESTED TO UL 1482 and ULC-S628

United States Stove Company

227 Industrial Park Road

P.O. Box 151

South Pittsburg, TN 37380, USA

1-800-750-2723

SAVE THESE INSTRUCTIONS

THIS MANUAL WILL HELP YOU TO OBTAIN EFFICIENT, DEPENDABLE SERVICE FROM THE HEATER, AND ENABLE YOU TO 

ORDER REPAIR PARTS CORRECTLY. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

852497-4805E

MODEL: 2200IE

Fireplace Insert

Masonry Fireplace Insert or Zero-Clearance (metal) Fireplace Insert

French version is available for download from the United States Stove Company website: http://www.usstove.com/

La version française est disponible pour téléchargement à partir du site United States Stove Company: http://www.usstove.com/

SAFETY NOTICE:

If this heater is not properly installed, a 

house fire may result. For your safety, 

follow the installation instructions. Con-

tact local building or fire officials about 

restrictions and installation in your area.

DO NOT use this appliance in a mobile home, manu-

factured home, trailer, or tent.

U.S. Environmental Protection Agency 

Certified to comply with 2015 particulate emissions standards.

Summary of Contents for 2200IE





















Reviews: