48
Deleting a Detector
TO DELETE A DETECTOR
1.
Safety Lock must be
off
Ensure Safety Lock has been turned off within the
last 5 minutes. See
Section 43.
2.
Press both buttons
for 3 seconds
Enter Programming mode by pressing
buttons 1 &
2
together for
3 seconds
. The siren will
beep 3
times
to confirm you have entered programming
mode.
3.
Press 1 time
Within 3 seconds, press
Button 1
to select
detector programming
. You will hear
1 beep
as
confirmation.
4.
Press 1 time
Within 30 seconds, press
Button 2
to
DELETE
a
detector. You will hear
2 beeps
as confirmation.
5.
Press the number of
times of the zone you
want to delete
Within 5 seconds, press
Button 1
. The first beep
you hear indicates zone 1. Each additional press of
Button 1
will increment the
zone
you wish to delete
and you will hear 1 beep each time. For example, if
you push
Button 1
, five times then this would select
zone 5 to be deleted.
6.
Press to delete &
exit
Within 5 seconds press
Button 2
. The selected
zone will be
deleted
. The system will beep the
number of times of the zone that has been deleted
(if you hear
3 low tone beeps,
you have passed
zone 8, or no valid zone was selected). You have
now completed deleting a detector.
