46
Adding a Detector
+
TO ADD A DETECTOR
1.
Safety Lock must
be off
Ensure Safety Lock has been turned off within the
last 5 minutes. See
page 43.
2.
Press both buttons
for 3 seconds
Enter Programming mode by pressing
buttons 1 & 2
together for
3 seconds
. The siren will
beep 3 times
to confirm you have entered programming mode.
3.
Press 1 time
Within 3 seconds, press
Button 1
to select
detector
programming
. You will hear
1 beep
as confirmation.
4.
Press 1 time
Within 30 seconds, press
Button 1
to
ADD
a
detector. You will hear
1 beep
as confirmation.
5.
Open the detector
you wish to add
Trigger the detector to be added
. If you are
learning a Passive Infrared detector remove the front
cover or press the tamper switch then release.
Learning mode will
timeout in 60 seconds
.
When
the system has successfully received the code from
the detector, the siren will
beep the number of
times of the zone
that the detector has to learn into
and will do so whenever any unlearnt detector
transmits.
Continued next page…
