44
Adding New Remotes
+
TO ADD A NEW REMOTE
1.
Press 1 time
Disarm
the system (if it is not already disarmed)
with an
original
remote control by pressing
Button
2
. You do not need to enter programming mode.
2.
Press and hold
Button 2
(for approximately 3
seconds) on the
original
working remote control
until the siren starts to beep continuously, then
release the button.
3.
Internal Siren
The main control unit will beep 9 times to confirm
you are adding a new remote control.
4.
Press new remote
control for 3 secs.
As soon as the beeps finish, press and hold down
button 2
on the
new remote
control for 3 seconds.
5.
Press new remote
control to test
The new remote control is now programmed into the
alarm. To
confirm
this press
Button 1
on the
new
remote
to ensure it arms the system.
If this new remote doesn’t work restart this
procedure from step one.
Your
Valet Home Alarm System
can only store a maximum of
Eight (8)
remotes in its memory. If you learn in a 9th remote, the 1st remote control will
be erased. If you lose a remote control, or have one stolen, simply repeat the
procedure above with your remaining remotes at least 10 times. This will
ensure that you have erased the lost remote from the memory of your
Valet
Home Alarm System
.
