38
Entry Delay (For Use With The Optional Wireless Keypad)
The programmable Entry Delay is 30 seconds. The purpose of this function is
to allow users to disarm the alarm system within the delay before the alarm is
set-off (triggering the Screamer, Siren and the Strobe & communicating with
the Valet MONITORING CENTRE). The Entry Delay is turned off as standard.
For it to be functional, the wireless alarm zones you would like an entry delay
on must be programmed via the optional Wireless Keypad. For information on
how to program Entry Delay please refer to the programming section of this
manual.
Red LED Indicator Main Control Unit
The red LED indicator is located on the bottom right corner of the main control
unit.
The red LED indicator will flash to indicate the current status of the system:
Flashing once every second = Armed
Flashing once every 2 seconds = Home/Armed
Flashing once every 5 seconds = Disarmed
On steady = Exit delay in progress
Fast flashing = System is in program mode or
power on test mode (10 seconds)
