Valet Digital Instruction Manual Download Page 12

Page: 12 / 64

MONITORING PLAN COSTS

Once you have purchased your Valet Digital System from your dealer, you will be billed

automatically each month for the monitoring service as long as you choose to have the

system connected to your phone line.

If you no longer require a monitored security system, you may simply disconnect your Valet

Digital from the phone line and no further payment is required. Please note that the product

will simply enter “shutdown mode” as described earlier in this document.

The cost of the RESIDENTIAL STANDARD PLAN is $29.95 per month including GST.

This cost is exclusive of all local call charges made by the system to the Valet

MONITORING CENTRE*. The plan includes up to 10 voice / SMS alarm notification calls to

all nominated recipients per month & unlimited email notifications. Additional voice / SMS

alarm notification calls will be charged at $1 each per alarm event.

The cost of the COMMERCIAL STANDARD PLAN is $39.95 per month including GST.

This cost is exclusive of all local call charges made by the system to the Valet

MONITORING CENTRE*. The plan includes up to 20 voice / SMS alarm notification calls to

all nominated recipients per month & unlimited email notifications. Additional voice / SMS

alarm notification calls will be charged at $1 each per alarm event.

The cost of the RESIDENTIAL BASIC PLAN is $15.00 per month including GST.

This cost is exclusive of all local call charges made by the system to the Valet

MONITORING CENTRE*. The plan includes unlimited email notifications and up to 10 SMS

notification messages per month (eg. 10 SMS messages to 1 keyholder or 2 messages to 5

keyholders etc). Additional SMS alarm notification messages will be charged at $1 each per

alarm event.

These prices are current as of the 1/11/05, but may be varied after consultation with you.

* When your Valet Digital requires to communicate with the Valet Monitoring Centre, the

cost of the call (25 cents) will be billed to your regular phone account.

Optional Alarm Patrol Guard Response

If you select the option of sending a Patrol Guard to your premises, then you must register

online and provide your credit card details, or alternatively call 1300 302 293 during

business hours. Each response will be charged directly to your credit card per call out. The

guard response service may not be available in all suburbs & towns.

Summary of Contents for Digital

































































Search results

Summary of Contents for Digital

Reviews:

Related manuals for Digital

Brands by name

Popular brands

Valet Digital, Instruction Manual

Search results

Summary of Contents for Digital

Reviews:

Related manuals for Digital

Brands by name

Popular brands