Manual
33
Limit values
Protection according to IP:
20
Ambient temperature °C (operation):
Min. +5 Max. +35
Ambient temperature °C (storage):
Min.
−
20 Max. +60
Relative air humidity % (operation):
Max. 80
Relative air humidity % (storage):
Max. 80 (bedewing the printers not allowed)
Guarantee
We do not take any responsibility for damage caused by:
•
Ignoring our operating conditions and operating manual.
•
Incorrect electric installation of environment.
•
Building alterations of our printers.
•
Incorrect programming and operation.
•
Not performed data protection.
•
Using of not original spare parts and accessories.
•
Natural wear and tear.
Note:
Improper handling is difficult to prove and therefore the producer does not grant guarantee for
the printhead.
When (re)installing or programming our printers please control the new settings by test running and
test printing. Herewith you avoid faulty results, reports and evaluation.
Only specially trained staff is allowed to operate the printers.
Control the correct handling of our products and repeat training.
We do not guarantee that all features described in this manual exist in all models. Caused by our
efforts to continue further development and improvement, technical data might change without notice.
By further developments or regulations of the country it is possible that illustrations and examples
shown in the manual are different from the delivered model.
Please pay attention to the information about admissible print media and the notes to the printer
maintenance, in order to avoid damages or premature wear.
We endeavoured to write this manual in an understandable form to give and you as much as possible
information. If you have any queries or if you discover errors, please inform us to give us the possibility
of improving our manual.
