Manual
21
REWINDING UNIT PR28
1
It is possible to use the external rewinding unit PR28 for:
•
rewinding the labels onto roll
•
rewinding the supporting paper in dispensing mode
Rewind labels onto roll
The rewinding unit is mounted at the front side of the printer without the enclosed return pulley.
Rewind supporting paper
The rewinding unit PR28 is mounted at the back side of the printer with the enclosed return pulley.
Setting tension
By modifying the tension with help from the central screw (1) it is possible to adapt the rewinding unit
PR28 to different demands.
Please note that the modification of tension should result in minor print quality!
Loosen the screw:
Reduce tension
Screw the screw:
Increase tension
Reduce of tension results in a less tighten rewinding of supporting paper res. the label.
Increase of tension results in a more tightens rewinding of supporting paper res. the label.
