Manual
18
CLEANING OF CUTTER
Caution:
Unplug the machine!
Danger of injury while working at the cutter!
Use a cotton stick (or similar) with special label remover (here available) and clean the cutter blade by
leading the stick from the left to the right side.
Repeat this procedure as long as the complete label material is removed.
Because of the fact that the cutter consists of two blades it is necessary to clean also the second
blade. Please follow the following steps:
Lead the screw driver (wide 3 mm) into the screw slit and turn it by 180° until you can see the second
cutter.
Repeat the cleaning procedure.
