Manual
20
FUNCTIONS
Make sure before printing that the printer is in online mode.
Send the print order via serial or parallel interface.
After transmission of the corresponding data the label is printed automatically.
It is possible to discontinue and then again continue the print order by means of the
key.
In case of a stopped print order you can press the
key to print again the last printed label. This
is significant in case an error is occurred during a print order and the order of labels (e.g. counter) is
important.
Press the
key to cancel an already stopped print order and the
key to continue a stopped
print order.
During a print order the printer is in online mode therefore it is possible to send data via interface at
the same time.
Status print
Press the
key (> 2 sec.) to print the current printer settings and a sample label. Make sure that the
printer is in offline mode.
You can modify the printer settings via interface.
Label feed
For a feed by one label, press the
key (< 2 sec.) but make sure that the printer is in offline
mode.
Saving
Saving of data such as text or graphic can be effected to the internal data memory. It is possible to
save data either by our label design software or by interface.
For detailed information, see the corresponding manual.
