Manual
9
LOADING OF PRINT MATERIAL
Loading of labels in standard mode
Open the printer cover.
Open printhead (A) by turning the lever (B) against clockwise direction.
Remove the outside label mounting plate (C).
Load the label roll (G) with inner winding onto the unwinding roll (D) and attach again the label
mounting plate (C).
Lead the label material (G) below the label guiding (E) and take care that the material runs through the
photocell (F).
To move the printhead (A) down, turn the lever (B) in clockwise direction until it locks.
Adjust the adjusting rings (H) of the label guiding to the width of material.
Close the printer cover.
