5-13
Valco Cincinnati, Inc.
Section 5 - Operation
MC090 - MCP-6 Control Unit
The four pressures/speeds are dependent upon each other. For example, the
first speed setting can never be greater than the second speed setting, and
the second speed setting can never be greater than the third, and so on. Also,
the second speed setting can never be less than the first speed setting, the
third speed setting can never be less than the second speed setting, and so
on. Therefore, if you cannot set speeds to where you want them (the Plus/
Minus Arrow Buttons will not increase or decrease the setting), check all four
of the settings. Use the Left Arrow and Right Arrow Buttons to move through
all pressures/speeds and check them. Reset them as necessary using the
Plus/Minus Arrow Buttons. You can also go back to factory defaults by
pressing the Erase Button until the setting will no longer change.
Helpful Hints about
Pressures
