5-14
Valco Cincinnati, Inc.
Section 5 - Operation
MC090 - MCP-6 Control Unit
Application-Specific Setup
Labeler Application
Under the configuration Wizard (initializing parameters) select the application:
Labeler
The basic setup for the labeler application is configured for 2 valves. To
increase the number of valves see
Section 4 - Programming, Additional
Setup Button Parameters, Output Configuration.
Each channel is preconfigured for 1 pattern selection. To increase the number
of patterns see
ection 4 - Programming, Additional Setup Button Parameters,
Output Configuration.
By default, each channel is preconfigured to use MAC24 valves. To change
this option see
Section 4 - Programming, First Use Setup (Wizard), Valve
Type.
Basic Startup Parameters to Change:
Basic Startup Parameters to Change:
Basic Startup Parameters to Change:
Basic Startup Parameters to Change:
Basic Startup Parameters to Change:
•••••
Pattern Screen:
Pattern Screen:
Pattern Screen:
Pattern Screen:
Pattern Screen:
The delay time must be set at a minimum of 1 ms. The glue time can be set to
the desired amount necessary for the application
•••••
Valve to Scanner Screen:
Valve to Scanner Screen:
Valve to Scanner Screen:
Valve to Scanner Screen:
Valve to Scanner Screen:
Distance from the scanner to the valve
Trigger Input
Delay Time, in ms
(Adjustable at Levels 3 & 4 only)
Time Cycle
(Activation Time, aka
Glue Time), in ms
