Valco Cincinnati MCP-6, Manual

Page: 43 / 72

4-19 Valco Cincinnati, Inc.
Section 4 - Programming MC090 - MCP-6 Control Unit
Measurement Mode Measurement Mode
Measurement Mode Measurement Mode
Measurement Mode - Timer Timer
Timer Timer
Timer - Set the units to Seconds (sec) or Milliseconds
(ms).
Measurement Mode
OR OR OR OR OR
(Packaging, Core Winding,
EPC12 and Others)
(Timer and Labeler)
Start/End Mode Start/End Mode
Start/End Mode Start/End Mode
Start/End Mode - The measurements used include the start of the glue line
from the leading edge of the product and the end of the glue line from the
leading edge of the product (see Section 5 - Operation). This Mode requires
an encoder and is not available for Timer applications
Pattern Entry Mode
Delay/Length Mode Delay/Length Mode Delay/Length Mode Delay/Length Mode Delay/Length Mode - There is a delay length from the leading edge of the
product to the start of the glue line. These measurements, and the length of
the glue line, will be input during the pattern setup (see Section 5 -
Operation).
OR OR OR OR OR
(All Applications)
Measurement Mode Measurement Mode
Measurement Mode Measurement Mode
Measurement Mode - Encoder Encoder
Encoder Encoder
Encoder - Set the units to Inch or Millimeter (mm).
See the heading “Encoder Menu
Screen” in this Section for additional
encoder settings.