4-6
Valco Cincinnati, Inc.
Section 4 - Programming
MC090 - MCP-6 Control Unit
Status LEDs - The Status Display LEDs show on/off status. When an LED is
on (lit up), the corresponding input or output is activated (see Figure 4-6).
Be sure the encoder, scanners, valves,
and the MCP-6 Control Unit have been
properly mounted to the parent
machine before setting up the control.
The glue and air lines are not
connected until after the control is
programmed.
The Status LEDs
Figure 4-6. Status LEDs
Scanner Status
LED Display
Valve Status
LED Display
