4-20
Valco Cincinnati, Inc.
Section 4 - Programming
MC090 - MCP-6 Control Unit
Purge Signal -
Purge Signal -
Purge Signal -
Purge Signal -
Purge Signal - This is a collective purge. When the Purge Signal is on,
scanner 3 cannot be used as a trigger input.
External Enable Signal -
External Enable Signal -
External Enable Signal -
External Enable Signal -
External Enable Signal - (This was also known as “web break detection.”)
When enabled, this function uses Scanner #4 to enable and disable gluing.
Output Configuration--Valves -
Output Configuration--Valves -
Output Configuration--Valves -
Output Configuration--Valves -
Output Configuration--Valves - Set the number of valves being used. Up to
four valves (channels) are available.
Output Configuration--Transducer -
Output Configuration--Transducer -
Output Configuration--Transducer -
Output Configuration--Transducer -
Output Configuration--Transducer - Set the number of transducers being
used. Currently, there is only one available.
Purge Signal
External Enable
Signal
Output Configuration
Batch Counter
(All Applications)
(All Applications)
(All Applications)
(All Applications)
Batch Counter must be enabled in this menu (Pattern Menu) so individual
Batch Count Menus will appear during setup (see Section 5 - Operation).
x2
x2
x2
x2
x2
