4-11
Valco Cincinnati, Inc.
Section 4 - Programming
MC090 - MCP-6 Control Unit
Password Levels
There are five password levels:
Level 0: Protected
Level 0: Protected
Level 0: Protected
Level 0: Protected
Level 0: Protected
When the unit is set to Level 0, only basic pattern settings can be entered or
changed. Level 0 provides the ultimate safety settings to prevent
unauthorized and/or accidental changes. This level can be set as the
“Default” level by someone with a Level 2 (Supervisor) password.
Level 1: Operator
Level 1: Operator
Level 1: Operator
Level 1: Operator
Level 1: Operator (No password required)
This is the “Default” level of operation when the unit is first turned on (unless
the “Default” setting has been changed to Level 0 by a Supervisor). Level 1
allows Operators to set patterns, pressures, load jobs, and enter basic
parameters necessary to run jobs.
Level 2: Supervisor
Level 2: Supervisor
Level 2: Supervisor
Level 2: Supervisor
Level 2: Supervisor (Default Password = 1234)
This is the highest user password level. At this level, the “Default” password
level can be set, individual valve settings can be viewed and changed, jobs
can be saved (as well as loaded), and the memory can be backed up. The
Level 2 password can be changed (this is explained under the heading “Level
2 Password Options”).
Level 3: Service
Level 3: Service
Level 3: Service
Level 3: Service
Level 3: Service
This password level is reserved for Authorized Service Personnel.
Level 4: Programmer
Level 4: Programmer
Level 4: Programmer
Level 4: Programmer
Level 4: Programmer
This password level is reserved for Factory Programmers.
Level 2 Password
Options
The Protected Level Mode (Level 0) increases security by changing the
Default Level of the unit from Level 1 to Level 0. This means that when the
unit is turned on, it will automatically be in Level 0 instead of Level 1 (until the
supervisor changes the Default Mode to Level 1). Only someone with the
Level 2 password can change the Default Level of the unit.
To change the Default Level of the unit, do the following:
Protected Level Mode
A Level 2 Supervisor has the ability to place the unit into the Protected Level
Mode (Level 0) and to change the Level 2 password.
