System Administration
Administrative tasks are on these pages of the web interface:
n
Networking – Ethernet configuration.
n
Streaming – IP (H.264) streaming.
n
Security – Set passwords and manage guest access.
n
Room Labels – Display helpful information in the web interface.
n
System – Controls to reboot, reset to defaults, and run firmware updates, access to soft DIP switches.
n
Help – Tech support contact information and a link to more product information.
n
Diagnostics – Logs to help Vaddio Technical Support troubleshoot issues.
Configuring Network Settings
N
ETWORKING PAGE
DHCP is the default setting, but the camera will use the default address of 169.254.1.1 if no DHCP server
is available.
You will only be able to enter the IP address, subnet mask, and gateway if you set IP Address to Static.
Caution
Consult your IT department before changing network settings. Errors in network configuration can make
the camera and its IP stream inaccessible from the network. Do not change DHCP/Static addressing, IP
address, subnet mask, or gateway unless you are very familiar with the characteristics and configuration of
the network where you install the camera.
18
Integrator's Complete Guide to the DocCAM 20 HDBT Ceiling-Mounted Document Camera
