Configuring Camera Behavior
Camera configuration tasks are on the DIP Switches tab of the System page. These tasks include:
n
Setting video resolution
n
Setting the way the camera responds to the remote
n
Setting the baud rate for RS-232 control
n
Enabling or disabling the laser pointer
n
Enabling or disabling the status light
n
Setting the HDMI color space
All these settings are on DIP Switches tab of the System page.
Setting Video Output Resolution
S
YSTEM PAGE
, DIP S
WITCHES TAB
The video output resolution set on the System page determines the resolution available on the video output
(s) of the connected OneLINK device or HDBaseT-capable third-party equipment. It also determines the
maximum resolution available for the IP stream.
To change the video output resolution:
Select the resolution and frame rate from the table. The arrow on the soft rotary switch points at the
character corresponding to your selection.
25
Integrator's Complete Guide to the DocCAM 20 HDBT Ceiling-Mounted Document Camera
