IR Remote Details
The Vaddio remote provides the following functions:
Power
– Switch the selected camera on or off.
Power indicator
– Lights momentarily when you press a button.
Back Light
– Use or turn off Back Light Compensation.
Data Screen
– Display the camera’s IP address and MAC address. Press this
button again to dismiss the display.
Camera Select
– In multi-camera installations, selects the camera to be
controlled. See
for information on configuring the camera as
camera 1, 2, or 3.
Home button
– Returns the camera to its home zoom level.
Laser On
– Toggles the laser pointer on and off.
Laser MOM
– Turns on the laser pointer momentarily, and forbids it to go out with
its friends if it doesn't turn off again after 5 seconds.
Caution
This product contains a 5 mw, 650 nm red laser pointer which produces visible
laser radiation. Avoid direct eye exposure. Do not look at the laser aperture
during camera operation.
Caution
Laser controls are available to remote operators using the web interface. Keep
your eyes out of the beam path when the camera is connected to power.
Auto Focus
– Switch the camera to Auto-Focus mode.
Zoom Speed
– Select Slow or Fast movements for telephoto and wide-angle shots.
n
T
(slow and fast) – Telephoto
n
W
(slow and fast) – Wide-angle
Manual Focus
– Switch the camera to Manual Focus mode.
Near (-)
adjustment – Moves the focus nearer when in manual focus mode.
Far (+)
adjustment – Moves the focus farther when in manual focus mode.
Preset
– Save the camera’s current zoom level as one of the numbered presets.
Reset
– Clear a saved preset.
Position Presets 1 through 6
– Move the camera to a predefined zoom level, or specify the preset to
save or clear.
Storing a Preset Using the Remote
Position the camera. Then hold down the Preset button and press one of the numbered preset buttons.
Clearing a Preset Using the Remote
Press and hold the Reset button while pressing the preset number you want to clear.
14
Integrator's Complete Guide to the DocCAM 20 HDBT Ceiling-Mounted Document Camera
