Using the IR Remote
The IR remote provides basic camera control for end users.
IR Remote Cheat Sheet
What do you need to do?
Button(s)
Power on or standby
Power
(green button at top right)
Select the camera to control (if this
remote controls more than one)
Camera Select
buttons 1 through 3 (second row of
buttons)
Discover the camera's IP address
Data Screen
button (top left) – press and hold for 3
seconds.
Center the camera's subject
Laser
buttons – The laser pointer is aligned at the factory
to point slightly above the center of the camera's subject.
Move the camera to a zoom preset
Position Preset
buttons 1 through 6 (bottom two rows)
Focus the camera
Auto Focus
button (near arrow buttons)
Manual Focus
buttons
Near
and
Far
(below Zoom
Speed buttons)
Control zoom speed
Zoom Speed
buttons - Slow
T
and
W
, Fast
T
and
W
for
telephoto and wide-angle modes (light gray)
Adjust for excess light behind the
camera's subject
Back Light
button (top center)
13
Integrator's Complete Guide to the DocCAM 20 HDBT Ceiling-Mounted Document Camera
