Editing IP Streaming Settings
S
TREAMING PAGE
Note
The web interface presents all the possible streaming resolutions values, but the IP stream cannot be
higher than the value set with the video resolution switch on the back of the camera. (See
for information on setting the switch.) If the selected value is out of range, the camera will automatically
adjust the streaming resolution.
If you are not sure about these settings, start with the defaults.
1. Select the video Quality Mode: Easy or Custom. Easy automatically sets the recommended frame rate;
Custom provides additional control.
2. Select the desired IP streaming resolution.
3. Easy quality mode only: Select Video Quality.
4. Custom quality mode only: Select the desired IP streaming frame rate.
5. Custom quality mode only: Select Constant or Variable bit rate.
6. Custom quality mode, Variable bit rate only: Set the Quality (Quantization) slider.
7. Save your changes.
Protocol and Streaming URL
S
TREAMING PAGE
The camera uses the RTSP protocol for H.264 streaming. Resolutions range from 1080p down to CIF;
frame rates are 60/30/25/15.
RTSP port:
Vaddio strongly recommends using the default RTSP port number.
Streaming URL:
If necessary, edit the path name to change the portion of the streaming URL that appears
after the IP address.
21
Integrator's Complete Guide to the DocCAM 20 HDBT Ceiling-Mounted Document Camera
