Vacon 20, Complete User'S Manual

Page: 63 / 160

control panel vacon
•
57
7
7. CONTROL PANEL
7.1 General
The panel is an irremovable part of the drive consisting of corresponding control
board; The overlay with display status on the cover and the button are in clarifica-
tions in the user language.
The User Panel consists of an alphanumeric LCD display with backlight and a keypad
with the 9 push buttons (see Figure 7.1).
7.2 Display
The display includes 14-segment and 7-segment blocks, arrowheads and clear text
unit symbols. The arrowheads, when visible, indicate some information about the
drive, which is printed in clear text in user language on the overlay (numbers 1…14
in the figure below). The arrowheads are grouped in 3 groups with the following
meanings and English overlay texts (see Figure 7.1):
Group 1 - 5; Drive status
1= Drive is ready to start (READY)
2= Drive is running (RUN)
3= Drive has stopped (STOP)
4= Alarm condition is active (ALARM)
5= Drive has stopped due to a fault (FAULT)
Group 6 - 10; Control selections
When API is operated by PC control, there are no arrowhead at I / O, KEYPAD and
BUS.
6= Motor is rotating forward (FWD)
7= Motor is rotating reverse (REV)
8= I/O terminal block is the selected control place (I / O)
9= Keypad is the selected control place (KEYPAD)
10= Fieldbus is the selected control place (BUS)
Group 11 - 14; Navigation main menu
11= Reference main menu (REF)
12= Monitoring main menu (MON)
13= Parameter main menu (PAR)
14= System main menu (SYS)