Vacon 20, Complete User'S Manual

Page: 146 / 160

140
•
vacon parameter descriptions
9
Repeat insertion of password;
Press OK button --> password is locked;
In case of different values for the two passwords: display Fault;
Press OK button --> repeat password a second time;
To interrupt insertion of Password --> Press BACK / RES.
Disabling a password:
Insert the actual password --> Press OK --> Password is automatically set to
0000;
All parameters can then freely be changed;
To enable password again --> see ‘Activating a password’ procedure.
Change of one parameter:
User tries to change a parameter value when password is enabled --> display
PW;
Press OK button;
Cursor (lowest horizontal segment) of the very left digit flashes;
Select first digit of password by using UP and DOWN key;
Press RIGHT button;
Cursor of the second digit flashes;
Select second digit of password by using UP and DOWN key;
Press RIGHT button;
Cursor of the third digit flashes;
Select third digit of password by using UP and DOWN key;
Press RIGHT button;
Cursor of the fourth digit flashes;
Select fourth digit by using UP and DOWN key;
Press OK button;
Current value of parameter to be changed will be display;
Change parameter value as normal;
Press OK --> New parameter value will be stored and Password is enabled
again;
For changing another parameter the procedure has to be repeated;
In the case of wanting to change multiple parameters it is of advantage to set
P4.3 to 0000;
After the change of the parameter values password has to be activated again;
Forgotten password:
Follow procedure "Disabling a password" and select 6020 as actual password.