V-ZUG Supremo HSL, Operating Instructions Manual

Page: 27 / 200

23
EN
PROBLEM POSSIBLE CAUSE SOLUTION
The milk contains
bubbles or squirts out of
the milk spout. The milk is not cold enough or is not
semi-skimmed.
The froth regulator is incorrectly adjusted.
The milk container lid is dirty.
You should ideally use skimmed or semi-skimmed milk at
refrigerator temperature (about 5°C).
If the result is not as you wished, try changing brand of
milk.
Move the froth regulator slightly towards the word “CAFFE
LATTE” (see section “Making cappuccino”).
Clean the milk container lid as described in the section
“Cleaning the milk container”.
Information on the V-ZUG warranty can be found at www.vzug.com →Service →Warranty
information. Please read this information carefully.
Your repair order
SERVICE & SUPPORT
Please register your V-ZUG appliance online immediately at www.vzug.com →Service
→Warranty registration. This will allow you to take advantage of the best possible support in
the event of an fault in the appliance during the warranty period. You will require the serial
number (FN) and appliance designation to complete the registration process. This informa-
tion can be found on the identification plate for your appliance.
My appliance information:
FN: ___________________ Appliance: _____________________
Always have this appliance information to hand when you contact V-ZUG. Thank you.
At www.vzug.com →Service→Service number you will find the telephone number of your
nearest V-ZUG service centre.
Technical questions, accessories, warranty extensions
V-ZUG is happy to help you with any general administrative or technical queries, to take
your orders for accessories and spare parts and to inform you about our progressive ser-
vice agreements.