V-ZUG Supremo HSL Operating Instructions Manual Download Page 23

Page: 23 / 200

Set temperature

To modify the temperature of the water used to make the coffee,
proceed as follows:
1. Press the

icon (B7) to enter the settings menu.

2. Press the

and

icons (B5 and B6) until “SET TEM-

PERATURE” is displayed;

3. Press the

icon (B4);

4. Press the

and

icons (B5 and B6) until the re-

quired temperature is displayed (

ൕ

= low,

ൕൕൕൕ

= high);

5. Press the

icon (B4) to confirm;

6. Press the

icon (B7) to exit the menu.

Water hardness

The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
•

Remove the “Total Hardness Test” strip (attached to page 2)
from its packaging then dip it fully in the water for a few
seconds.

Remove and wait about 30 seconds (until it changes colour
and forms red squares).

•

Turn the appliance on by pressing the ON/stand-by button
(A7).

• Press

the icon (B7) to enter the menu and then the

and

icons (B5 and B6) until “WATER HARDNESS”

is displayed.

• Press

the icon (B4);

• Press

the

and

icons (B5 and B6) until the num-

ber coincides with the number of red squares on the test
strip (for example, if there are 3 red squares on the test
strip, select the message “WATER HARDNESS

ൕൕൕ

” .

• Press

the icon (B4) to confirm.

The coffee machine is now programmed to provide the des-
cale warning when actually necessary.

Contrast

To increase or reduce the contrast of the display, proceed as fol-
lows:
• Press

the icon (B7) to enter the menu and then the

and

icons (B5 and B6) until “CONTRAST” is dis-

played.

• Press

the icon (B4).

• Press

the

and

icons (B5 and B6) until the re-

quired level of contrast is displayed: (

ൕ

= low;

ൕൕൕൕൕ

= high)

• Press

the icon (B4) to confirm.

•

Press the

icon (B7) once to exit the function or twice

to exit the menu.

Statistics

This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the

icon (B7) to enter the settings menu.

2. Press the

and

icons (B5 and B6) until “STATIS-

TICS” is displayed;

3. Press the

icon (B4);

4. By pressing the

and

icons (B5 and B6), you can

check:

how many coffees have been made;

how many milk drinks have been made;

how many times the machine has been descaled.

the total number of litres of water delivered.

5. Press

the

icon (B7) twice to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the

icon (B7) to enter the menu;

2. Press the

and

icons (B5 and B6) until “DEFAULT

VALUES” is displayed;

3. Press the

icon (B4);

4. “CONFIRM?” is displayed;
5. Press the

icon (B4) to confirm and exit.

Descaling

Descale the machine when the message “DESCALE” flashes on
the display.

Important!

Descaler contains acids which may irritate the skin and eyes.
It is vital to respect the manufacturer’s safety warnings given on
the descaler pack and the warnings relating to the procedure to
follow in the event of contact with the skin and eyes.

Please note:

Use the descaler recommended by the manufacturer only.
Under no circumstances should you use sulphamic or acetic
based descalers. Their use invalidates the guarantee.
Failure to descale the appliance as described above also invali-
dates the guarantee.
1. Turn the machine on.
2. Enter the settings menu by pressing the

icon (B7).

Press the

and

icons (B5 and B6) until “DES-

CALE” is displayed;

3. Press the

icon (B4) and “CONFIRM?” is displayed.