V-ZUG Supremo HSL, Operating Instructions Manual

Page: 24 / 200

20
4. Before confirming, empty the water tank completely (A12).
Pour the descaler diluted with water (respecting the pro-
portions indicated on the descaler pack) into the water tank
and put the water tank back in the appliance.
Danger of burns!
Hot water containing acid flows out of the hot water spout and
coffee spout.
Avoid contact with splashes of water.
5. Place an empty container with a minimum capacity of 1.5
litres under the hot water spout and coffee spout.
6. Confirm with the icon (B4). The message “ADD DES-
CALER Press ” is displayed.
7. After confirming by pressing icon, the message “DES-
CALING IN PROGRESS” is displayed.
The descale programme starts and the descaler liquid is
delivered first from the coffee spout and then from the hot
water spout.
The descale programme automatically performs a series of
rinses and pauses to remove limescale deposits from inside
the machine.
After about 30 minutes, the message “RINSING FILL TANK” is
displayed.
8. The appliance is now ready for rinsing through with clean
water. Remove the water tank, empty, rinse under running
water, fill with clean water and replace.
“RINSING PRESS ” is displayed.
9. Empty the container used to collect the descaler solution
and replace it under the coffee spout.
10. Press the icon (B4) to start rinsing.
Hot water flows out of the coffee spout and the message
“RINSING PLEASE WAIT” is displayed.
Once the rinsing is finished, the message “RINSING FILL
TANK” is displayed.
Fill the water tank and press the
icon (B4). Place the container under the hot water spout.
11. When the water tank is completely empty, the message
“RINSING COMPLETE PRESS ” is displayed.
12. Press the icon (B4). The appliance goes off automati-
cally.
Please note: If descaling is interrupted before comple-
tion, the process must be begun again from the beginning.
TURNING THE APPLIANCE OFF
Each time the appliance is turned off, it performs an automatic
rinse cycle which cannot be interrupted.
Danger of burns! During rinsing, a little hot water
flows from the coffee spouts.
Avoid contact with splashes of water.
To turn the appliance off, press the ON/stand-by button (A7).
The appliance performs a rinse cycle then goes off.
Please note: If the appliance is not used for an extend-
ed period, place the main switch on the back of the appliance
(A23) in the 0 position.
TECHNICAL DATA
Voltage: 220-240 V~ 50/60 Hz max. 10A
Absorbed power: 1350W
Pressure: 15 bars
Water tank capacity: 1.8 litres
Size: LxHxD: 594x454x412 mm
594x378x412 mm
544x375x412 mm
Weight: 26 kg
The appliance complies with the following EC direc-
tives:
• Low Voltage Directive 2006/95/EC and subsequent amend-
ments;
• EMC Directive 2004/108/EC and subsequent amendments;
• EC Regulation 1275/2008 for standby
Materials and accessories coming into contact with food conform
to European regulation (EC) no. 1935/2004.