UTStarcom PLS-7075, Phone Manual

Page: 155 / 164

Impor
tan
t
Saf
ety Inf
orma
tion
Radiofrequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it ' s turned
on, it receives and transmits radiofrequency (RF) signals. When you use
your phone, the system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.
Knowing Radiofrequency Safety
The design of your phone complies with updated NCRP standards described
below.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE) and
the American National Standards Institute (ANSI) joined in updating ANSI
' s
1982 standard for safety levels with respect to human exposure to RF
signals. More than 120 scientists, engineers and physicians from
universities, government health agencies and industries developed this
updated standard after reviewing the available body of research. In 1993,
the Federal Communications Commission (FCC) adopted this updated
standard in a regulation. In August 1996, the FCC adopted hybrid standard
consisting of the existing ANSI/IEEE standard and the guidelines published
by the National Council of Radiation Protection and Measurements (NCRP).
Body-Worn Operation
To maintain compliance with FCC RF exposure guidelines, if you wear a
handset on your body, use the supplied or approved carrying case, holster or
other body-worn accessory. If you do not use a body-worn accessory, ensure
the antenna is at least 7/16 inch (1.5 centimeters) from your body when
transmitting. Use of non-approved accessories may violate FCC RF
exposure guidelines.
For more information about RF exposure, visit the FCC Web site at
www.fcc.gov .
Section 4A: Important Safety Information 145