UTStarcom PLS-7075, Phone Manual

Page: 75 / 164

Section 2C: Using Your Phone
’
s Built-in Camera 65
䢇
Mirror to select vertical or horizontal .
䢇 Settings to select your settings. (See “ Selecting Camera
Settings ” on page 66 for details.)
Setting the Self-Timer
To activate the self-timer:
1.
From camera mode, select Options > Self-Timer .
2.
Highlight the length of delay you want the timer to use
(
5 Seconds , 10 Seconds or Off ) and press .
3.
Select Capture ( ) when you are ready to start the
timer. (appears on the upper right portion of the Main LCD
during the selftimer countdown.)
4.
Get ready for the picture. (When the timer is down to three
seconds, the self-timer icon will turn red and the phone
will begin to beep.)
To cancel the self-timer after it has started:
䊳
Press Cancel ( ).
Note: While the self-timer is active, all keys are disabled except
, ,
and Cancel ( ).
Using the Zoom
This feature allows you to zoom in on an object when you take
a picture. Depending on your resolution settings, you can
adjust the zoom from 1x to 5x for 320x240, and 1x to 8x for
128x160 (not available for high resolution).
To use the zoom:
1.
From camera mode, press the navigation key right or left,
or the Side Volume key up or down to adjust the zoom.
(The gauge bar appears.)
C
amer
a