background image

Section 9  TROUBLESHOOTING

9-5

If a paper misfeed occurs, a message will be displayed in the touch 
panel about the misfeed and copying will stop. Leave the power 
switch ON ( | ) and refer to “

Clearing paper jams

” on page 9-6 to 

remove the jammed paper.

Inch specifications

Metric specifications

Cautions

* Do not reuse misfed paper.
* If paper is torn during removal, be sure to remove any loose 

scraps of paper from inside the copier. Loose scraps inside the 
copier could cause another misfeed later.

* Once misfed paper has been removed, warm-up will begin. The 

misfeed indications will disappear, and the copier will return to 
the same settings prior to the misfeed.

* If a misfeed occurs in the optional Document Finisher, do not add 

the misfed copy to the other copies in the Document Finisher 
tray, as that copy will be automatically made again.

* When a misfeed occurs, if the power switch is turned OFF (O) 

without removing the jammed paper, a message about the 
misfeed and “J00” will be displayed the next time the power 
switch is turned ON ( | ) again. 
In such a case, follow the procedure displayed on the touch panel 
to remove the jammed paper.

Misfeed location indicators

(1) Misfeed in the paper feed section (Page 9-6.)
(2) Misfeed in the paper conveyor unit (Page 9-11.)
(3) Misfeed in the fixing section (Page 9-12.)
(4) Misfeed inside the left cover (Page 9-14.)
(5) Misfeed in the Duplex Unit (Duplex copiers only) 

(Page 9-15.)

(6) Misfeed in the optional Document Processor 

(Page 9-16.)

(7) Misfeed in the optional Document Finisher (Page 9-17.)

If paper jams

 WARNING

High voltage is present in the charger section. 

Take sufficient care when working in this area, as 

there is a danger of electrical shock.

 CAUTION

The copier’s fuser unit is extremely hot. Take 

sufficient care when working in this area, as there 

is a danger of getting burned.

Paper misfeed.

JAM 00

1. Open Right Side Cover of drawer 2. 

Remove paper if inside.

2. Pull out drawer 1.
3. Remove paper.
4. Close paper drawer.

Close Cover.

Paper misfeed.

JAM 00

1. Open right cover 2. 

Remove paper if inside.

2. Pull out paper cassette 1.
3. Remove paper.
4. Close paper cassette.

Close cover.

(1)

(5)

(6)

Paper misfeed.

JAM 00

1. Open Right Side Cover of drawer 2. 

Remove paper if inside.

2. Pull out drawer 1.
3. Remove paper.
4. Close paper drawer.

Close Cover.

(7)

(4)

(2)

(3)

Summary of Contents for CDC 1526
























































































































































































































































































































Reviews: