UTAH SCIENTIFIC Graphic Station 4000 System Setup And Operations Download Page 31

Page: 31 / 87

Introduction

1-21

The LogoMaster Library

Browse

: Used to change a logo to a different graphic.

Resize

: Accesses the application used to resize the logo.

Show as Toolbar Button

: Will place a graphic thumbnail in the visual workspace and

Compose sections.

Name and Desc

: Provides the ability to give the logo a Name and Description which

is shown in the logos list.

Hot-Spot X & Y

: Used to offset the logo’s hot spot. (Normally the center of the

graphic).

Center button

: Returns the graphic’s hotspot to the original values.

Fields to Run

: Sets the number of fields that a bug (animated graphic) will run before

stopping. A value of “0” will cause the animation to run continuously.

Persistent

: Determines whether or not the graphic remains visible after it has run its

allotted number of fields.

Play

: Causes the bug to animate in the display window located at the bottom of the

pane if the Persistent box is not checked.

Cell Field Dur

: Sets the number of fields that each cell of the animated graphic is

displayed. Can be used to speed up or slow down an animation.

Sel. Hotkey

: For setting up a quick keyboard graphic recall. Clicking on the canvas

following the Hotkey command will insert that graphic.

Summary of Contents for Graphic Station 4000
























































































Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands

UTAH SCIENTIFIC Graphic Station 4000, System Setup And Operations

Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands