UTAH SCIENTIFIC Graphic Station 4000 System Setup And Operations Download Page 74

Page: 74 / 87

2-12

GS-4000 Setup and Operations

CrawlMaster

Revert Query

Enter the Text Field Name, Speed Adjust Field, Group ID Field and Use ID Field names
that are used in the database columns. Check the Speed Adjust Field, Group ID Field and
User ID Field boxes if they are to be used by the Query.

Click Validate Output to confirm the database setup is correct.

Click Show Output to Test the database link. The output will be displayed in the window.
Use the horizontal scroll to see all of the information.

Click OK to close the Query Setup window.

The Culture button allows the user to select the language used in the incoming messages.

Figure 2-8.

Summary of Contents for Graphic Station 4000
























































































Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands

UTAH SCIENTIFIC Graphic Station 4000, System Setup And Operations

Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands