UTAH SCIENTIFIC Graphic Station 4000 System Setup And Operations Download Page 28

Page: 28 / 87

1-18

GS-4000

LogoMaster

The right hand pane contains the tools to change the background attributes.

Browse

: Used to change a background to a different graphic.

Resize

: Accesses the application used to resize the background.

Show as Toolbar Button

: Will place a graphic thumbnail in the visual workspace

and Compose sections.

Name and Desc

: Provides the ability to give the background a Name and

Description which is shown in the backgrounds list.

X & Y Start

: Used to offset the background graphic with respect to the display

area.

Center

: Returns the X & Y Start fields to their original settings.

Hotkey

: For setting up a quick keyboard background recall.

Summary of Contents for Graphic Station 4000
























































































Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands

UTAH SCIENTIFIC Graphic Station 4000, System Setup And Operations

Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands