UTAH SCIENTIFIC Graphic Station 4000 System Setup And Operations Download Page 67

Page: 67 / 87

Installation

2-5

Overview

Crawl Channels Incoming Tab

Click the Incoming tab. The Incoming pane is used to set up the link to feeder applications
such as the News Data Feeder and Field Feeder which are included with the GS-4000.

Figure 2-2.

Port number for the selected crawl channel is set to match the port number of where data is
coming from such as the News Data Feeder.

The Culture button allows the user to select the language used in the incoming messages.

Accept Duplicate Messages is not used and should not be checked.

Accept Local Host is checked when the data server is running the GS-4000

Accept Remote Host is checked when the data server is running on a another hardware
platform.

Summary of Contents for Graphic Station 4000
























































































Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands

UTAH SCIENTIFIC Graphic Station 4000, System Setup And Operations

Search results

Summary of Contents for Graphic Station 4000

Reviews:

Related manuals for Graphic Station 4000

Brands by name

Popular brands