Introduction
1-45
Command Dispatcher
S
ec
ti
o
n
1
Along the top, left side of the main screen for Command Dispatcher are buttons labeled
“Connect”, “Disconnect”, and “Edit”. The “Connect” and “Disconnect” buttons are used to
establish connection with the MC-4000 to listen for triggers, or to terminate connection. The
“Edit” button opens the Server Editor window which allows for defining communications
parameters for the serial connection to the MC-4000.
Figure 1-26.
Server Editor
The Image above shows the Server Editor default settings in order that Command Dispatcher
can communicate with the MC-4000. The proper settings are as follows:
Server Model: Squeeze Max
Serial Port : COM 1
Baud Rate : 38400
Data Size : 8
Stop Bits : 1
Parity
: None
Flow Control: None
